Sparklabs Learning
ClassesSearchPrintable packs
Back to JSS 1 First Term
Full packLearner notesTeacher plansCurriculum onlyInclude all weeks

Sparklabs Learning / Digital Technology

JSS 1 First Term

Week 7: Storage Devices

School
Creative Brains Academy
Subject
Digital Technology
Pack
Full pack
Prepared
7 November 2026

Week index

  1. 01Introduction to ICT and Information Ages
  2. 02History, Evolution and Generations of Computers
  3. 03What Is a Computer and Its Parts
  4. 04Functions of Parts, Hardware and Software
  5. 05Input and Output Devices
  6. 06Basic Typing Skills
  7. 07Storage Devices
  8. 08Simple Uses of the Internet
  9. 09Introduction to MS Word
  10. 10Creating and Saving Documents
  11. 11Revision and Examination Preparation
  12. 12Examination

Week 7 / First Term

Storage Devices

Monday 19 October 2026 to Friday 23 October 2026

Lesson notes

Learning Objectives

  • Define storage and state why a computer needs storage.
  • Differentiate between primary and secondary storage.
  • Name the common secondary storage devices.
  • State the units used to measure storage.

What Storage Does

Storage keeps data so that it can be used again later. A computer needs storage for three reasons. Programs must be available when the machine starts. Data must survive after the machine is switched off. Work must be kept while other work is being done.

The amount of storage is measured in bits and bytes. A bit is the smallest unit and holds a single 0 or 1. A byte is made of eight bits and holds one character. Larger units are the kilobyte, megabyte, gigabyte and terabyte.

Primary Storage

Primary storage is the working memory of the computer. It is very fast and is used directly by the processor. RAM is the main part. RAM holds programs and data only while the computer is on, and its contents are lost when the power goes off.

ROM is read only memory. Its contents are fixed when it is made and it cannot be written to by the user. ROM keeps the start up instructions that the computer needs before any operating system loads. Cache is a small fast memory that holds data the processor is about to use.

Secondary Storage

Secondary storage keeps data permanently. It is slower than primary storage but much larger. The hard disk drive stores the operating system, programs and files. A solid state drive does the same job faster because it has no moving parts.

Removable secondary storage includes the flash drive, memory card, optical disc and external hard disk. Optical discs come as CD, DVD and Blu-ray. The flash drive and memory card are now more common because they are small, fast and cheap.

Comparing Storage Devices

Storage devices are compared by capacity, speed, portability and cost. A hard disk has large capacity but is fixed inside the computer. A flash drive has smaller capacity but can be carried. An optical disc can be read easily but has low capacity and can be scratched.

Learners should check free space before saving large files. Deleting a file frees space, but the space is only returned to the system when the Recycle Bin is emptied.

How Data Is Stored and Measured

A computer stores everything in binary, using only the digits 0 and 1. Each 0 or 1 is called a bit, and eight bits make a byte, which can hold one character such as the letter A.

Storage capacity is measured in units that grow larger. A kilobyte is about one thousand bytes, a megabyte is about one million bytes, a gigabyte is about one thousand megabytes, and a terabyte is about one thousand gigabytes.

Types of Secondary Storage

Different storage devices suit different jobs. A hard disk drive uses spinning magnetic discs and gives a large capacity at low cost. A solid state drive uses electronic chips, so it is faster, quieter and more durable. A flash drive and a memory card are small and portable. Optical discs such as CDs and DVDs store data that a laser reads.

UnitApproximate size
BitOne single 0 or 1
Byte8 bits, one character
Kilobyte1024 bytes
Megabyte1024 kilobytes
Gigabyte1024 megabytes
Terabyte1024 gigabytes
DeviceTypeCapacityPortable
RAMPrimarySmallNo
ROMPrimarySmall and fixedNo
CachePrimaryVery smallNo
Hard disk driveSecondaryLargeNo
Solid state driveSecondaryLargeNo
Flash driveSecondaryMediumYes
Memory cardSecondarySmallYes
CD and DVDSecondaryMediumYes
External hard diskSecondaryVery largeYes
UnitSize
BitA single 0 or 1
ByteEight bits, about one character
KilobyteAbout one thousand bytes
MegabyteAbout one million bytes
GigabyteAbout one thousand megabytes
TerabyteAbout one thousand gigabytes

Practical Work

  1. Check and write down the total and free space of the laboratory computer hard disk.
  2. Insert a flash drive, create a folder on it and copy three files into the folder.
  3. Measure the size of three files of different types and record which type uses the most space.
  4. Empty the Recycle Bin and record how much free space is regained.
  5. Compare the speed of opening the same file from the hard disk and from a flash drive.

Scenario-Based Questions

  1. A pupil needs space to save a large video but the computer reports that there is not enough room. Give two ways to create space.
  2. Explain why a computer will not start properly if the RAM is faulty.
  3. A school wants to give each learner 8GB of portable storage. Name the device and state two reasons it is suitable.
  4. Differentiate between RAM and ROM using a table of four points.
  5. Explain what is lost and what is kept when a computer is switched off.
  6. A file of 40MB is copied onto a flash drive that has 25MB free. Explain what happens and why.
  7. Explain why a solid state drive makes a computer feel faster even when the processor is unchanged.

Teacher plan

LEARNING OBJECTIVES: BY THE END OF THE LESSON PUPILS SHOULD BE ABLE TO:

Cognitivei. Define storage and state why a computer needs storage. ii. Differentiate between primary and secondary storage. iii. Name the common secondary storage devices. iv. State the units used to measure storage.
Affectivei. Appreciate the value of Storage Devices in school, at home and in the community. ii. Show willingness to use digital tools carefully, safely and responsibly.
Psychomotori. Check and write down the total and free space of the laboratory computer hard disk. ii. Insert a flash drive, create a folder on it and copy three files into the folder. iii. Measure the size of three files of different types and record which type uses the most space. iv. Empty the Recycle Bin and record how much free space is regained.

Rationale: Storage keeps data so that it can be used again later. Understanding what Storage Does, primary Storage, secondary Storage, comparing Storage Devices helps learners use digital technology confidently, safely and responsibly.

Pre-requisite Knowledge: In Week 6, learners studied Basic Typing Skills, including parts of the Keyboard, finger Position, typing Practice and Accuracy. The knowledge from that week is used again in this lesson.

Learning Material/Teaching Aid: Whiteboard, markers, computer or laptop where available, printed notes and charts on Storage Devices, practical task sheets, learners' notebooks and pens.

Reference Materials: Digital Technology for Junior Secondary Schools (JSS 1); NERDC Digital Technology Curriculum; Digital Technology JSS 1 First Term Notes (Week 7); First Term examination and Continuous Assessment question papers.

LESSON DEVELOPMENT

Stage/Step
(Time)
Teacher's ActivitiesStudent's ActivitiesLearning Points
Introduction
5 MINUTES
Welcomes learners, revises Week 6 (Basic Typing Skills) with two quick oral questions, and asks what they already know about Storage Devices. Elicits responses and writes the topic on the board.Recall the previous lesson and share what they already know about Storage Devices.Connecting prior knowledge to Storage Devices.
Step 1
6 MINUTES
Covers What Storage Does: Storage keeps data so that it can be used again later. A computer needs storage for three reasons. Covers Primary Storage: Primary storage is the working memory of the computer. It is very fast and is used directly by the processor.Listen, take notes and answer oral questions on "What Storage Does" and related points.Understanding: What Storage Does; Primary Storage.
Step 2
6 MINUTES
Covers Secondary Storage: Secondary storage keeps data permanently. It is slower than primary storage but much larger. Covers Comparing Storage Devices: Storage devices are compared by capacity, speed, portability and cost. A hard disk has large capacity but is fixed inside the computer.Copy the key points, give examples from school and everyday life, and ask questions on "Secondary Storage" and related points.Understanding: Secondary Storage; Comparing Storage Devices.
Step 3
6 MINUTES
Covers How Data Is Stored and Measured: A computer stores everything in binary, using only the digits 0 and 1. Each 0 or 1 is called a bit, and eight bits make a byte, which can hold one character such as the letter A.Discuss in pairs, then report one point on "How Data Is Stored and Measured" to the class.Understanding: How Data Is Stored and Measured.
Step 4
6 MINUTES
Covers Types of Secondary Storage: Different storage devices suit different jobs. A hard disk drive uses spinning magnetic discs and gives a large capacity at low cost. A solid state drive uses electronic chips, so it is faster, quieter and more durable.Respond to questions, complete the examples on the board and note down "Types of Secondary Storage".Understanding: Types of Secondary Storage.
Practical Work
6 MINUTES
Guides learners through the practical work: (i) Check and write down the total and free space of the laboratory computer hard disk. (ii) Insert a flash drive, create a folder on it and copy three files into the folder. (iii) Measure the size of three files of different types and record which type uses the most space. Moves round the class to check progress and correct unsafe or careless use.Carry out the practical tasks individually or in pairs and record what they did in their notebooks.Applying the lesson through hands-on practice.
Evaluation
3 MINUTES
Asks learners to: i. Define storage and state why a computer needs storage. ii. Differentiate between primary and secondary storage. iii. Name the common secondary storage devices. iv. State the units used to measure storage.Respond verbally and in writing to the evaluation questions.Assessment and consolidation of the lesson content.
Conclusion
2 MINUTES
Recaps the main points: what Storage Does, primary Storage, secondary Storage, comparing Storage Devices, how Data Is Stored and Measured. Links them to the assignment and previews Week 8: Simple Uses of the Internet.Listen, ask questions and copy the assignment.Reinforcement of key concepts and a preview of the next lesson.

Assignment: i. A pupil needs space to save a large video but the computer reports that there is not enough room. Give two ways to create space. ii. Explain why a computer will not start properly if the RAM is faulty.

Sparklabs Learning / JSS 1 First Term / Full pack

Lesson content is provided for classroom planning. Adapt timings and tasks to the approved school calendar and available devices.

Sparklabs Learning

Digital Technology lesson notes and teaching plans for JSS 1 to SS 3.

Curriculum

Open educational resources for JSS 1 to SS 3 Digital Technology.

Quick links

Search the curriculumBrowse classesPrintable term packs

Academic session 2026 / 2027